Operation Check

After completing the installation and setting of the product, check the paper feeding and print quality.
Also, since the items to be implemented vary depending on the option configuration, check the corresponding items by referring to the following instructions.

Paper feed confirmation
  1. Start the service support mode.
  2. Select [07 Installation Setting / Operation Check].

  3. Select the [Paper Feed/ Print Quality Check] tab.

  4. Select [Paper Feed Confirmation].

  5. From the menu below, select the setting for which you want to check the paper feeding, and press [Execute].


    MenuSetting Items
    Feed TrayC1, C2, C3, C4, MP Tray
    Available Paper SizesA4, Letter
    Duplex setting1-sided, 2-sided
    Feed speedFull, Half, Low
    Number of Feed1 to 100

  6. Confirm the feed and press [Execution].

  7. Select [Paper Feed Confirmation (ADF)].

  8. Load paper in the ADF tray and select [Execute].

  9. After confirming the paper feed, select [End].

Print quality confirmation
Check Point / チェックポイント
  • Be sure to check whether there is a problem with the amount of side register margin from each paper feed tray (MP tray,C1, C2,C3,C4).
    *When installed


  1. Start the service support mode.
  2. Select [07 Installation Setting / Operation Check].

  3. Select the [Paper Feed/ Print Quality Check] tab.

  4. Select [Check Pattern Print].

  5. From the menu below, select the setting for which you want to check the paper feeding, and press [Execute].


    MenuSetting Items
    Feed TrayC1, C2, C3, C4, MP Tray
    Available Paper SizesA4, Letter
  6. After confirming the check pattern, press [OK].