Pre-delivery Work Lists

Note / 補足

Pre-delivery work can be performed for this product in order to reduce the time spent at the customer's site during delivery and installation.
Carry out the work according to the option configuration and contract details with reference to the following. Part of the work content requires special treatment, so pay sufficient attention to the work content.

Product

Overview of operation

Note

Main Unit

  1. Unpacking（ Main Unit Bundled Items and Unpacking ）
  2. Carry out setting work (contract-related settings, FW update, date and time settings, initial filling, etc.).
  3. Start the service support mode and executeTransport Preparation  .
  4. Remove the Ink cartridges
  5. Attach the transport protecting parts (head, cap, right door).（Protecting the products to avoid damages while transporting ）
  6. Perform a simple protection.（Protecting the products to avoid damages while transporting ）
  1. None
  2. When performing FW update, it is recommended that all options to be installed are installed.
  3. If this is not done, failure to do so may result in poor printing or ink leakage due to vibration during transportation.*If printing defects do not improve with head cleaning, required the ink supply unit replacement.
  4. Failure to do so may result in product failure, ink leakage, or miscounting of remaining ink due to vibrations during transportation or tilting of the product.
    Immediately attach the ink supply port cap you brought to the removed ink cartridge. If the ink supply port cap is not attached, ink remaining in the supply port may drip.（Protecting the products to avoid damages while transporting ）
  5. Failure to do so may result in product failure due to vibration during transportation.
  6. Failure to do so may result in product failure due to vibration during transportation.
Additional Cassette Unit
  1. Unpacking（C2 Additional Cassette Unit Bundled Items and Unpacking Procedure , C3C4 Additional Cassette Unit Bundled Items and Unpacking Procedure ）
  2. Attach to the main unit.（Additional Cassette Unit Installation  ）
  3. Perform FW update.
  4. Initial adjustments and settings cannot be performed.（Additional Cassette Unit Initial Adjustment Procedure ）
  5. Perform simple protection.（Protecting the products to avoid damages while transporting ）
  1. None
  2. None
  3. When performing FW update, it is recommended that all options to be installed are installed.
  4. Side registration adjustment must be performed in the installation environment.
  5. Failure to do so may result in product failure due to vibration during transportation.
Extension Fax Board
  1. Unpacking
  2. Attach to the main unit.（Extension G3 Fax Board Installation Procedure ）
  3. Configure activation settings.（Fax Settings ）
  4. Perform FW update.（Fax Settings）
  5. Configure initial settings.（Fax Settings）
  1. None
  2. None
  3. After enabling the special mode, perform FW update and initial settings.
    Activation is required to use IP FAX.（IP Fax/OCR Activation Procedure   ）
  4. When performing FW update, it is recommended that all options to be installed are installed.
  5. None
Wireless LAN unit
  1. Unpacking
  2. Attach to the main unit.（Wireless LAN unit installation procedure ）
  3. Perform initial settings and FW update.（Wireless LAN Setting ）
  1. None
  2. None
  3. When performing FW update, it is recommended that all options to be installed are installed.
OCR
  1. Unpacking
  2. Attach to the main unit.（OCR option installation procedure  ）
  3. Perform FW update.
  4. Perform activation.（IP Fax/OCR Activation Procedure    ）
  1. None
  2. None
  3. When performing FW update, it is recommended that all options to be installed are installed.
  4. None
Authentication Table
  1. It cannot be transported while attached to the main unit, so unpack and install it in the installation environment.
  1. None