Extension G3 Fax Board Installation Procedure

Bundled Items

No.	Bundled Item	Qty
1	Extension G3 Fax Board	1
2	Authentication seal	1

important / 重要

Authentication seal must be affixed to the exterior of the product (No paste position specified). (Recommended near the manufacturing nameplate).

Installation Procedure

Prepared items

Extension G3 Fax Board
Gloves
Phillips (+) screwdriver

Minimum number of workers

1 person

Caution / 注意

Be sure to check the following precautions before installation.

All workers must read the installing procedure together before starting work.
Wear easy-to-move clothing, gloves and safety shoes and work with care for injuries etc.
Work with sufficient working space.
Work in the position with less load, and stop working immediately as you feel that the workload is too large.
All work must be done with the power off.

Installation Procedure (LINE1, LINE2, LINE3)

Check Point / チェックポイント

When installing several extension G3 fax boards, install it in the order of LINE1, LINE2, and LINE3.

Remove the 2 screws and remove the LINE1 or LINE2 or LINE3 cover.
- : 3x14D/P

Insert the extension G3 fax board and fix it with 2 screws.

Check Point / チェックポイント

After installing the extension G3 fax board, be sure to do the following.
- Firmware update for the additional G3 fax board.（Firmware Update)
- Fax Setting (Fax Settings)
- Activation (Only IP-FAX)(IP Fax/OCR Activation Procedure)